Simulate Early, Simulate Often... In Rhino
The geometry was created in Rhino using a reference photo taken from the side. The pillar diameter and transverse pillar spacing were then used as scaling parameters.
The pillars were extruded to match up with the bottom surface of the rails and then combined together. The only loading is due to its own weight. High Strength concrete material was used (but no ribar was included)
Tags:
Comment
Dear Mr. Wiatr
If you use FE packages you will know that they tend to exaggarate the deformation so that you can see it. If you were able to use a magnifying glass, you will find that the actual displacement shown in the video is very small. I am sure that you were trying to appear funny and clever at the same time. Of course you are a clever man but I would suggest that you hang on to your full time job and leave the 'comedy' to professional comedians.
© 2024 Created by Michael Freytag. Powered by
You need to be a member of Scan-and-Solve for Rhino to add comments!
Join Scan-and-Solve for Rhino