Simulate Early, Simulate Often... In Rhino
There is something wrong with the concrete material failure criterion
Hi，all：
There is something wrong with the concrete material failure criterion，
the pressure is 2000mpa，and the Material is shown above.
while the danger level is 0，whose color is blue！
another problem ： I can't add the new material.
what is wrong with that?
Thanks.
Ma SD
Views: 192
- Attachments:
-
-
concrete model （mm）.3dm, 2.4 MB
-
Replies to This Discussion
-
Permalink Reply by Michael Freytag on
-
The problem appears to be related to using units of mm. I'll look into it. Thank you for spotting this.
Regarding adding material, the material reader is overly sensitive to the positioning of the columns and the characters used to position them. Be sure you are using SPACES to set the column positions, not tabs.
My system says your concrete.rar file is not a valid rar file.
~Michael
-
Permalink Reply by Ma SD on
-
Mr. Michael:
Thank you .
Yes, you are right.
update the concrete model. it is another concrete model，the units is mm，the same problem!
I create another model whose units is m, the results are OK.
adding material is OK too.
Regards
Ma SD
-
-
I've corrected the problem with the computation of danger level and have uploaded an updated version (2010.10.6). Thank you for identifying this bug.
~Michael
-
-
Thank you for your quick reply.
the danger level is OK. another probem : the report can't write.
Good luck.
Ma SD
-
-
Ma,
What OS are you using?
When you select [Report...], you should be presented with a file dialog to specify the destination for the html output. Are you at least seeing this dialog? Do you have permission to write to the directory you select? Is anything being written?
~Michael
© 2024 Created by Michael Freytag.
Powered by
