Scan-and-Solve for Rhino

Simulate Early, Simulate Often... In Rhino

It could be fine!if SNS adds the buckling analysys function.
the failure of a compression member has to do with the strength and stiffness of the material and the geometry (slenderness ratio) of the member. For example, pushing on the ends of a business card or bookmark can easily reproduce the buckling. So the Strength Criterion is not enough.
 
Cheers!
 
Ma SD
 
 

Views: 34

Reply to This

FOLLOW SCAN&SOLVE

© 2020   Created by Michael Freytag.   Powered by

Badges  |  Report an Issue  |  Terms of Service