Solid export with data on nodes - Scan-and-Solve for Rhino2024-03-29T12:31:09Zhttp://www.scan-and-solve.com/forum/topics/solid-export-with-data-on-nodes?commentId=6083097%3AComment%3A24308&feed=yes&xn_auth=noI was assuming so. Actually,…tag:www.scan-and-solve.com,2011-10-27:6083097:Comment:243082011-10-27T18:58:24.858ZKristoffer Josefssonhttp://www.scan-and-solve.com/profile/kristofferjosefsson
<p>I was assuming so. Actually, I wouldn't mind so much how they were spaced, as long as the density is proportional to the number of elements specified for the calculation. That way one may simply interpolate the results afterwards, manually.</p>
<p>Alternatively, if you have an internal representation where you have denser sample points where there is a lot of detail, this would facilitate a more accurate interpolation. Hence, this might be a good option too.</p>
<p> </p>
<p>In the particular…</p>
<p>I was assuming so. Actually, I wouldn't mind so much how they were spaced, as long as the density is proportional to the number of elements specified for the calculation. That way one may simply interpolate the results afterwards, manually.</p>
<p>Alternatively, if you have an internal representation where you have denser sample points where there is a lot of detail, this would facilitate a more accurate interpolation. Hence, this might be a good option too.</p>
<p> </p>
<p>In the particular application I'm looking at, I want to populate the solid with point-density depending on the magnitude of the stress field. Since I don't know the field on beforehand, it wouldn't help much if I must specify it before the simulation. Probably I would just feed in a regular grid in that case.</p>
<p> </p>
<p>Hope that helps,</p>
<p>Kristoffer</p> Kristoffer,
We don't have a t…tag:www.scan-and-solve.com,2011-10-27:6083097:Comment:242072011-10-27T18:52:54.266ZMichael Freytaghttp://www.scan-and-solve.com/profile/MichaelFreytag
<p>Kristoffer,</p>
<p>We don't have a traditional finite element mesh with nodes to parameterize the interior of the solid. How would you like to specify the sample points inside the solid? On a regular grid? From an external file?</p>
<p> </p>
<p>Do you have a particular end result in mind that might govern how the sample points are generated and the sample values are delivered or stored?</p>
<p>Thanks,</p>
<p>Michael</p>
<p>Kristoffer,</p>
<p>We don't have a traditional finite element mesh with nodes to parameterize the interior of the solid. How would you like to specify the sample points inside the solid? On a regular grid? From an external file?</p>
<p> </p>
<p>Do you have a particular end result in mind that might govern how the sample points are generated and the sample values are delivered or stored?</p>
<p>Thanks,</p>
<p>Michael</p>