simulation not finishing? - Scan-and-Solve for Rhino2024-03-28T17:07:58Zhttp://www.scan-and-solve.com/forum/topics/simulation-not-finishing?commentId=6083097%3AComment%3A48408&feed=yes&xn_auth=noI agree with you......tag:www.scan-and-solve.com,2017-06-10:6083097:Comment:487032017-06-10T07:17:48.117ZAryavrit Travelshttp://www.scan-and-solve.com/profile/AryavritTravels
<p>I agree with you......</p>
<p>I agree with you......</p> Ok, so it appears to have bee…tag:www.scan-and-solve.com,2017-04-14:6083097:Comment:484082017-04-14T12:51:08.878ZMike Calvinohttp://www.scan-and-solve.com/profile/MikeCalvino
<p>Ok, so it appears to have been some issue in the main file. In the original file, I have about 9 or 10 different scenarios & the file is about 1.2GB. It is a working file where I have been running simulations on different parts of the larger assembly for a few weeks, modifying components etc. My guess is that something got corrupted, or maybe too many solutions, or something else? </p>
<p></p>
<p>I selected only the geometry that was to be used in that scenario & exported it as a…</p>
<p>Ok, so it appears to have been some issue in the main file. In the original file, I have about 9 or 10 different scenarios & the file is about 1.2GB. It is a working file where I have been running simulations on different parts of the larger assembly for a few weeks, modifying components etc. My guess is that something got corrupted, or maybe too many solutions, or something else? </p>
<p></p>
<p>I selected only the geometry that was to be used in that scenario & exported it as a separate file. Then opened that new file & defined the scenario from scratch. This time it came to solution in 5hr 28min.</p>
<p></p>
<p> I'm sure it's hard to say with a file that size & that many scenarios run over & over, but any other specific ideas of what may have happened?</p>
<p></p>
<p>Thanks Scan & Solve . . . Cheers!</p>