hogging and sagging - Scan-and-Solve for Rhino2024-03-28T23:59:38Zhttp://www.scan-and-solve.com/forum/topics/hogging-and-sagging?feed=yes&xn_auth=noThis is really cool and helpf…tag:www.scan-and-solve.com,2016-12-08:6083097:Comment:468522016-12-08T09:17:01.438ZThomas Brandwijkhttp://www.scan-and-solve.com/profile/ThomasBrandwijk435
<p>This is really cool and helpful!</p>
<p>Is is possible to use a surface like the picture below for the hydrostatic load in the future?<a href="http://storage.ning.com/topology/rest/1.0/file/get/2506659204?profile=original" target="_self"><img width="721" src="http://storage.ning.com/topology/rest/1.0/file/get/2506659204?profile=RESIZE_1024x1024" width="721" class="align-full"/></a></p>
<p>This is really cool and helpful!</p>
<p>Is is possible to use a surface like the picture below for the hydrostatic load in the future?<a href="http://storage.ning.com/topology/rest/1.0/file/get/2506659204?profile=original" target="_self"><img width="721" src="http://storage.ning.com/topology/rest/1.0/file/get/2506659204?profile=RESIZE_1024x1024" width="721" class="align-full"/></a></p> Thank you
I will try and I le…tag:www.scan-and-solve.com,2015-04-28:6083097:Comment:431312015-04-28T07:38:50.593ZRon de Voshttp://www.scan-and-solve.com/profile/RondeVos
<p>Thank you</p>
<p>I will try and I let you know</p>
<p>Ron</p>
<p>Thank you</p>
<p>I will try and I let you know</p>
<p>Ron</p> Hello Ron,
First, let me say…tag:www.scan-and-solve.com,2015-04-27:6083097:Comment:434252015-04-27T20:03:17.074ZMichael Freytaghttp://www.scan-and-solve.com/profile/MichaelFreytag
<p>Hello Ron,</p>
<p>First, let me say I am not a marine engineer or designer. However maybe this is helpful:</p>
<p><a href="http://storage.ning.com/topology/rest/1.0/file/get/2506669662?profile=original" target="_self"><img class="align-full" src="http://storage.ning.com/topology/rest/1.0/file/get/2506669662?profile=original" width="665"></img></a></p>
<p></p>
<p>First I split the wetted faces of the hull amidship so I could specify separate loads to the front and rear sections.</p>
<p>I then applied 2 separate hydrostatic loads (one forward and one rearward) to the corresponding wetted faces of the hull.…</p>
<p>Hello Ron,</p>
<p>First, let me say I am not a marine engineer or designer. However maybe this is helpful:</p>
<p><a href="http://storage.ning.com/topology/rest/1.0/file/get/2506669662?profile=original" target="_self"><img src="http://storage.ning.com/topology/rest/1.0/file/get/2506669662?profile=original" width="665" class="align-full"/></a></p>
<p></p>
<p>First I split the wetted faces of the hull amidship so I could specify separate loads to the front and rear sections.</p>
<p>I then applied 2 separate hydrostatic loads (one forward and one rearward) to the corresponding wetted faces of the hull. When specifying the water surface for each hydrostatic load, I oriented the surface normal so the water surface was aligned with the planar water surfaces depicted here for the "hogging" configuration.</p>
<p>For the "sagging" configuration, I made a copy of the model and redefined the water surface to align with the planar water surfaces depicted here.</p>
<p>Does this make sense? Is it helpful?</p>
<p>~Michael</p>