Ghosted and X-Ray view! - Scan-and-Solve for Rhino2024-03-28T13:31:30Zhttp://www.scan-and-solve.com/forum/topics/ghosted-and-xray-view?commentId=6083097%3AComment%3A3010&feed=yes&xn_auth=noOkay, thanks for this informa…tag:www.scan-and-solve.com,2011-01-16:6083097:Comment:30152011-01-16T23:02:50.000ZSimon Klopphttp://www.scan-and-solve.com/profile/SimonKlopp
<p>Okay, thanks for this information! But because of it is important to look onto stress levels "inside" a construction, I´m pleased if you can fix this problem!</p>
<p> </p>
<p>PS: Torque! Great tool and great job, you´ve done there! I will load some screenshots into the gallery!</p>
<p>Okay, thanks for this information! But because of it is important to look onto stress levels "inside" a construction, I´m pleased if you can fix this problem!</p>
<p> </p>
<p>PS: Torque! Great tool and great job, you´ve done there! I will load some screenshots into the gallery!</p> Ghosted and X-Ray are not pro…tag:www.scan-and-solve.com,2011-01-16:6083097:Comment:30102011-01-16T19:55:44.000ZMichael Freytaghttp://www.scan-and-solve.com/profile/MichaelFreytag
<p>Ghosted and X-Ray are not properly supported yet... I was busy adding torques and body loads. I'll have these fixed in the next release.</p>
<p> </p>
<p>I suggest running SnS in view modes other than Ghosted or X-Ray until the next release.</p>
<p> </p>
<p>~Michael</p>
<p>Ghosted and X-Ray are not properly supported yet... I was busy adding torques and body loads. I'll have these fixed in the next release.</p>
<p> </p>
<p>I suggest running SnS in view modes other than Ghosted or X-Ray until the next release.</p>
<p> </p>
<p>~Michael</p>