Wed Jul 04, 2012
19:05:42
Geometry
Geometry Summary
| Quantity | Unit |
|---|
| Volume | 25.0497 mm3 |
| Surface Area | 59.5342 mm2 |
| Mass | 1.9664e-07 Mg |
| Bounding Box |
|---|
| min. corner | {-30.984007, 29.015993, 0.000000} |
| max. corner | {-29.015993, 30.984007, 10.000000} |
Material Properties
| Property | Value |
|---|
| Description | ANSYS Steel |
| Density | 7.85e-09 Mg/mm3 |
| Elastic Modulus | 200000 MPa |
| Poisson Ratio | 0.33 |
| Default Failure Criterion | von Mises |
| Tensile Yield Strength | 250 MPa |
| Ultimate Tensile Srength | 460 MPa |
| Ultimate Compressive Srength | 253 MPa |
Loads & Restraints
Load Summary
| Description | Type | Definition |
|---|
| Load 0 | Vector Force per Face | {0,-10,0} N |
| Body Load | Gravity | {0.000000, 0.000000, 0.000000} mm/s2 |
Restraint Summary
| Description | Definition |
|---|
| Restraint 0 | X-Fixed, Y-Fixed, Z-Fixed |
Simulation Summary
Settings
| Basis Functions |
|---|
| Degree | 1 |
| nx | 32 |
| ny | 32 |
| nz | 154 |
| Element size | {0.065480, 0.065480, 0.065480} |
| Resolution setting | 103100 |
| Computation Box |
|---|
| min. corner | {-31.047691, 28.952166, -0.041991} |
| max. corner | {-28.952337, 31.047520, 10.041902} |
Units
| Quantity | Unit |
|---|
| Length | mm |
| Mass | Mg |
| Force | N |
| Time | s |
Simulation Results
Displacements
Displacement Summary
| Amount | Location |
|---|
| Minimum | 1.12002e-12 mm | {-29.212172,30.468790,4.360155} |
| Maximum | 6.53701e-09 mm | {-29.196800,30.254549,9.547989} |
Danger Level
Danger Level Summary
| Amount | Location |
|---|
| Minimum | 1.38185e-07 | {-30.102581,30.020142,0.000000} |
| Maximum | 0.00100041 | {-29.453070,29.734188,9.839322} |
Results Extrema
| Minimum | Maximum |
|---|
| X-Displacement | -2.03517e-09 mm | 1.87527e-09 mm |
| Y-Displacement | -2.93307e-09 mm | 6.41769e-09 mm |
| Z-Displacement | -1.63364e-09 mm | 1.54508e-09 mm |
| Total Displacement | 1.12002e-12 mm | 6.53701e-09 mm |
| Von Mises Stress | 3.45462e-05 MPa | 0.250101 MPa |
| Max. Principal Stress | -0.0723381 MPa | 0.356046 MPa |
| Mid. Principal Stress | -0.0735998 MPa | 0.16889 MPa |
| Min. Principal Stress | -0.212869 MPa | 0.155928 MPa |
| Danger Level (von Mises) | 1.38185e-07 | 0.00100041 |
| Danger Level (Max. Shear Stress) | 1.50971e-07 | 0.00115397 |
| Danger Level (Rankine) | 6.77936e-08 | 0.000841381 |
| Danger Level (Coulomb Mohr) | 8.35573e-08 | 0.000932349 |
| Danger Level (Modified Mohr) | 6.77936e-08 | 0.000774012 |
CAUTION
Design decisions require experimental data and substantial experience; they should never be made based solely
on a software simulation. Simulation is not intended to replace physical testing of prototypes, which is required
to validate any design.